BMW R1200R Forum banner

Sidestand too long?

24K views 70 replies 33 participants last post by  MotoCon  
If you follow the Panzer’s suggestion, you'll be sorted. However, I found the side stand on my ‘17 LC too long and tried for over a year going through the dismount/side stand rigmarole to the point total annoyance. In the end, I gave up and shortened the side by 15mm two years ago; it’s no longer an issue. If you are prepared to have it trimmed cost-wise, I think you'll be far more comfortable. That's said, BMW has a 15mm shorter side stand in their parts catalogue, but I suspect with freight and currency exchange it's probably cheaper to have it shortened by a welder/bike shop.


Sent from my iPhone using Tapatalk
 
I know there's a shorter side stand option in Japan as well. I looked into ordering one, but with currency exchange & freight for my needs, it was cheaper and faster to shorten locally.


Sent from my iPhone using Tapatalk
 
Could you share the web site or part number for that shorter side stand? Thanks.
Here's a couple of links. I also posted some info a while back - I'll try to locate the post.




Sent from my iPhone using Tapatalk
 
I shorted my side stand by 15mm, and the bike lean now seem to be about right to my eye. I had the welds X-ray inspected and passed.

If fitting a new shorter stand or alterning the exiting stand - checkout the Panzer’s response on this tread.


Sent from my iPad using Tapatalk
 
I had a similar bike wash calamity in my driveway. I should have known better because the driveway has an awkward camber. Anyway, long story short, LC went over. Apart from superficial, but expensive, parts replacement $$$, the big hurt was it happened in clear view of the bbq area where my sons were hosting a beers & bbq for a few of their mates...

Image



Sent from my iPhone using Tapatalk